Avocent AVRIQ for USB Computers

AVRIQ-USB

$135.00$90.00
Save $45.00

Discontinued
Recommended replacement: Avocent AVRIQ-USB2
Alternative options: Contact Us

Connect a USB Computer to the Avocent AutoView 2000

Avocent KVM Dongle Compatibility Table

Question: we just received a server that has only usb for KBd and Mouse. Will this cable work with my autoview 2000. How long is the cable if it does
Answer: Yes, this is the cable for the autoview 2000. The cable itself is only about a foot long, but it is connected through standard cat5 cabling.

Question: Will this cable also work with the ECS17KMM8-001 (Avocent LCD Console and KVM over IP Switch Integrated Tray - KVM console - )
Answer: Thank you for your inquiry. According to Avocent, this cable will work with the ECS17KMM8-001.

Question: What is the difference between AVRIQ-USB & DSAVIQ-USB2
Answer: They are essentially the same product, but the DSAVIQ-USB2 will allow for virtual media capability and the AVRIQ-USB will not.

Minicom has a good definition of virtual media, "Virtual Media is a method of connecting a remote storage media such as CD-ROM, USB mass storage, ISO image and floppy disk to a target computer that may be anywhere over the network." More information can be found here: http://www.minicom.com/kvm-virtual-media.htm

Question: Will Avocent AVRIQ-USB work with Avocent AV1515-001??
Answer: Thank you for your inquiry. Yes, the AVRIQ-USB server interface module works with Avocent AutoView Analog KVM Appliances including the AV1515-001.

Question: will the AVRIQ-USB work with AV3008-001 avocent switch? If not please provide the correct USB part # that will work with the model AV3008-001.
Answer: Yes, the AVRIQ-USB will work for the AV3008-001.

Question: Will this dongle work with the Avocent AV3200-001 KVM? If not, which dongle should I buy?
Answer: Thank you for your inquiry. Yes, the AVRIQ-USB will work for the Avocent AutoView 3200. You can see additional KVM dongle/cable options listed as accessories on this page: https://www.kvm-switches-online.com/av3200-001.html

Question: It appears that this adapter has only one USB connection...if so, what adapter do I need for USB mouse AND keyboard?
Answer: Thank you for your inquiry. This Avocent USB dongle will control both the mouse and keyboard through the single USB connection, without the need for an adapter or Y. Many of the USB dongles on the market nowadays utilize a single USB connector to pass the keyboard and mouse information to the target computer, saving a USB slot on the connected server.

Question: Will this cable work between my Autoview 3016 and my server that has 2 USB ports for Keyboard and mouse
Answer: Thank you for your inquiry. This Server interface module will work for the Autoview 3016 (P/N: AV3016-xxx where xxx is a country specific code).

Question: Can you please provide export classification for this item: ECCN, HTS and country of origin. Thank you.
Answer: Thank you for your inquiry. The ECCN number for the AVRIQ-USB is: EAR99 and country of origin is: CN.

Question: Will this cable also work with Avocent AMX 5000 series ??
Answer: Thank you for your inquiry. Unfortunately, we do not believe this CIM would work with the AMX5000. The equivalent, listed CIM is the AMIQ-USB found here: https://www.kvm-switches-online.com/amiq-usb.html.

Question: We are using "Avocent AutoView 1000" with our old infra, but recently we added some new servers which is having only USB ports. Is this work with "Avocent AutoView 1000" ?
Answer: Thank you for your inquiry. Yes, this unit should work with your AutoView 1000. However, this particular dongle is being phased out. The replacement module is the AVRIQ-USB2: https://www.kvm-switches-online.com/avriq-usb2.html.

Question: Will this cable work with an Autoview 1000R??
Answer: Thank you for your inquiry. Yes, the AVRIQ-USB would work with an AutoView 1000R. Please note however, this model has been discontinued and replaced by the AVRIQ-USB2: https://www.kvm-switches-online.com/avriq-usb2.html

Question: Will this cable work with the KVM 0108AD form Dell?
Answer: Thank you for your inquiry. We are not familiar with the Dell KVM 0108AD and could not find any additional information using that part number. However, unless Avocent is the manufacture of the Dell KVM, this dongle would not work, as it is an Avocent proprietary computer interface module.

Please also note, this Computer Interface module has been discontinued and replaced by the AVRIQ-USB2: https://www.kvm-switches-online.com/avriq-usb2.html.

Question: will this work on the Avocent DSR2020?
Answer: Thank you for your inquiry. Unfortunately, no. This discontinued dongle was for use with he AutoView series of KVM. The Avocent DSR2020 uses the DSRIQ series which has for the most part been replaced by the MPUIQ-VMCHS (https://www.kvm-switches-online.com/mpuiq-vmchs.html).

Question: what it the classification for this cable HTS & ECCN?
Answer: Thank you for your inquiry. The ECCN is EAR99 and the HTS US is 8544.42.2000

Question: We have using Avocent Autoview 2000 & module Avocent AVRIQ-USB on server end can we use same module AVRIQ-USB used for different KVM Product like ATEN 2-Console 16-Port Cat 5 KVM Switch with Daisy-Chain Port KH2516A
Answer: Thank you for your inquiry. Unfortunately due to proprietary connectors and /or cable pin outs, the KVM dongles supplied for one KVM most likely will not work with another across vendor brands.

Question: Is the AVRIQ-USB UL-60950-1 rated?
Answer: Thank you for your inquiry,

According to the vendor, the AVRIQ-USB was UL Certified to UL 60950-1 but the version is unknown.

Apologies for the long delay while we confirmed this with original product development team. The AVRIQ-USB, CMN 1005-003 was made obsolete in 2014, so information for it was a bit scarce.

Please let us know if there is anything else we can ever help you with!