NTI 16 x 16 DVI Video Matrix Switch

SM-16X16-DVI-LCD

$4,285.00$3,940.23
Save $344.77
FREE Shipping on orders over $100

The NTI SM-16x16-DVI-LCD is a 16 x 16 DVI Video Matrix Switch. It switches single link DVI-D video from 16 video sources among multiple displays.

The VEEMUX DVI SM-16x16-DVI-LCD Video Matrix Switch routes video from up to 16 single link digital DVI video sources (computers, DVD players, satellite receivers, etc.) to up to 16 displays (LCD monitors, Plasma screens, DLP HDTVs, projectors, etc.).

NTI SM-16X16-DVI-LCD Features:

  • Configure and control the switch through Ethernet, serial port, front panel buttons, or optional IR remote.
  • Supports DVI-D interface for crisp and clear video quality on flat panel displays.
  • Supports HDTV resolutions up to 1080p and computer resolutions up to 1920x1200 (WUXGA).
  • Meets the electrostatic discharge (ESD) immunity requirements of IEC/EN 61000-4-2.
  • Each output provides one video signal.
  • Each input can be independently connected to any or all outputs.
  • HDCP is not supported when connecting one input to multiple outputs.
  • EDID learning for the support of any DVI display device.
  • Built-in default EDID configuration tables for both PC and MAC.
  • Dual default EDID configuration tables: high resolution without audio and TV resolution with audio.
     

NTI SM-16X16-DVI-LCD Details:

Control Methods:

Ethernet Control:

  • Configuration can be done over the Internet via Web server or Telnet.
  • Female RJ45 connector.
  • 10/100 BaseT Ethernet interface.

    Web Server:

    • Security is ensured by password and user configurable timeout.
    • Up to 25 users can access the web page at one time.
    • The user can access the following pages:
      • Switch page: allows the user to connect any input to any output, save and recall up to ten connections.
      • Administration pages: administrator can access setup pages, port setting page and update firmware page. Assign names to video and audio inputs and outputs.
      • Password page: allows the user to change the password for accessing the web interface.
      • Help page: review documentation on the usage of the web interface.
      • Update web server page: globally update the web server to any settings that have been changed.
      • Logout page: view currently active connections and logout of the web interface.

    Telnet

    • Security is ensured by password.
    • Commands are similar to RS232 commands.
    • The telnet server listens on ports 2000 and 2005.
      • Port 2000 is for an operator telnet session.
      • Port 2005 is intended for a software control type session.

Front Panel Interface

  • Configuration and control can be done using the front panel buttons.
  • Keypad allows selection of the input source to be routed to the desired outputs.

RS232 Control

  • Configuration and control can be done through the serial port.
  • Control the switch using the NTI Switch Control Program with Graphical User Interface (GUI control) via RS232.

Infrared Remote (Optional)

  • Transmitter can be up to 30 feet away.
  • Control up to 15 switches with one remote.
  • Power: Two AAA batteries (included).

NTI SM-16X16-DVI-LCD Application Diagram

NTI SM-16X16-DVI-LCD Application Diagram

 NTI SM-16X16-DVI-LCD Specifications:

Mechanical  
Width 19 in. (48.3 cm.)
Height 3.5 in. (8.9 cm.)
Depth 12.0 in. (30.5 cm.)
Video Input  
Compatibility Compatible with computers and HDTV video sources (satellite receivers, DVD players, etc) with DVI video.
Multiplatform support Windows 2000/XP/Vista/7, Windows Server 2000/2003/2008, Solaris, Linux, FreeBSD, and MAC OS 9/10.
Connectors 16 female DVI-I connectors.
Signal Type single link digital DVI
Video Output  
Connectors 16 female DVI-I connectors.
Resolution Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
Video bandwidth 1.65 Gbps
Signal Type single link digital DVI
Power  
Local/Remote Unit 100 to 240 VAC at 50 or 60 Hz via IEC connector.(Country-specific power supply cable included.)
Protocols HTTP, HTTPS, TCP/IP, DHCP, UDP, ARP, IPV4
Cables Interface cables between the video sources and the switch are required for proper operation.
*Cables not included. See "optional accessories" for recommended cables
Regulatory Approvals CE, RoHS
Question: Can I set up a switch configuration and save it via the front panel buttons? As a default?
Answer: Thank you for your inquiry. Yes, you can save configurations and setup a default. According to the manual, "The SM-16X16-DVI-LCD and SM-32X32-DVI-LCD switches provide the ability to save and recall up to 100 switch configurations using the LCD menu. The switch configurations define the current port connections, volume control settings, and video blank status."

After configurations have been made and saved, the unit will load the configuration saved into memory location 0 as the default upon power up.