The NTI SM-32x32-DVI-LCD is a 32 x 32 DVI Video Matrix Switch. It switches single
link DVI-D video from 32 video sources among multiple displays.
The VEEMUX DVI
SM-32x32-DVI-LCD Video Matrix Switch routes video from up to 32 single link digital DVI
video sources (computers, DVD players, satellite receivers, etc.) to up to 32
displays (LCD monitors, Plasma screens, DLP HDTVs, projectors, etc.).
NTI SM-32X32-DVI-LCD Features:
Configure and control the switch through Ethernet, serial port, front
panel buttons, or optional IR remote.
Supports DVI-D interface for crisp and clear video quality on flat panel
displays.
Supports HDTV resolutions up to 1080p and computer resolutions up to
1920x1200 (WUXGA).
Meets the electrostatic discharge (ESD) immunity requirements of IEC/EN
61000-4-2.
Each output provides one video signal.
Each input can be independently connected to any or all outputs.
HDCP is not supported when connecting one input to multiple outputs.
EDID learning for the support of any DVI display device.
Built-in default EDID configuration tables for both PC and MAC.
Dual default EDID configuration tables: high resolution without audio
and TV resolution with audio.
NTI SM-32X32-DVI-LCD Details:
Control Methods:
Ethernet Control:
Configuration can be done over the Internet via Web server or Telnet.
Female RJ45 connector.
10/100 BaseT Ethernet interface.
Web Server:
Security is ensured by password and user configurable timeout.
Up to 25 users can access the web page at one time.
The user can access the following pages:
Switch page: allows the user to connect any input to any output, save
and recall up to ten connections.
Administration pages: administrator can access setup pages, port setting
page and update firmware page. Assign names to video and audio inputs and
outputs.
Password page: allows the user to change the password for accessing the
web interface.
Help page: review documentation on the usage of the web interface.
Update web server page: globally update the web server to any settings
that have been changed.
Logout page: view currently active connections and logout of the web
interface.
Telnet
Security is ensured by password.
Commands are similar to RS232 commands.
The telnet server listens on ports 2000 and 2005.
Port 2000 is for an operator telnet session.
Port 2005 is intended for a software control type session.
Front Panel Interface
Configuration and control can be done using the front panel buttons.
Keypad allows selection of the input source to be routed to the desired
outputs.
RS232 Control
Configuration and control can be done through the serial port.
Control the switch using the NTI Switch Control Program with Graphical
User Interface (GUI control) via RS232.
Infrared Remote (Optional)
Transmitter can be up to 30 feet away.
Control up to 15 switches with one remote.
Power: Two AAA batteries (included).
NTI SM-32X32-DVI-LCD Application Diagram
NTI SM-32X32-DVI-LCD Specifications:
Mechanical
Width
19 in. (48.3 cm.)
Height
7.0 in. (17.8 cm.)
Depth
17.0 in.
(43.2 cm.)
Video Input
Compatibility
Compatible with computers and HDTV video
sources (satellite receivers, DVD players, etc) with DVI video.
Multiplatform support
Windows 2000/XP/Vista/7, Windows Server
2000/2003/2008, Solaris, Linux, FreeBSD, and MAC OS 9/10.
Connectors
32 female DVI-I connectors.
Signal Type
single link digital DVI
Video Output
Connectors
32 female DVI-I connectors.
Resolution
Supports HDTV
resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
Video bandwidth
1.65 Gbps
Signal Type
single link digital DVI
Power
Local/Remote Unit
100 to 240 VAC at 50 or 60 Hz via IEC
connector.(Country-specific power supply cable included.)
Protocols
HTTP, HTTPS, TCP/IP,
DHCP, UDP, ARP, IPV4
Cables
Interface cables
between the video sources and the switch are required for proper
operation.
*Cables not included. See "optional accessories" for recommended cables
