The Black Box ServSwitch SW722A-R2 is a 4 port secure KVM switch which
enables you to switch between computers with just the touch of a button and at the
same time provides separation between computers. This secure KVM switch lets
you control multiple computers of varying security levels from single workstations.
The SW722A-R2 is permanently hard wired. Every circuit is soldered down and there
is no flash ROM. There is no way to use software to access one CPU from the other
or to access one network from the other. This ServSwitch allows automatic
booting even with different kinds of computers. Connect both USB and PS/2® CPUs
to the ServSwitch, and boot them all simultaneously. Or boot them remotely from
your PC. Plug a USB or PS/2 keyboard and mouse into the switch and access
USB or PS/2 CPUs—or any combination of the two.
Black Box SW722A-R2 Features:
Non-upgradable ROM for security
Provides separation of computers connected to different networks
Works in secure environments
Automatic keyboard and mouse booting for IBM PC compatibles
Switch from your keyboard or the switch’s front panel
Black Box SW722A-R2 Specifications:
Mechanical
Height
2.3 in. (5.8 cm.)
Width
8.8 in. (22.4 cm.)
Depth
4.9 in. (12.4 cm.)
Weight
3 lbs. (1.4 kg.)
Power
115 VAC, 60 Hz
Distance (Maximum)
Cable length
20 ft. (6 m.)
VGA with coax cable
100 ft. (30.4 m.)
Resolution (Maximum)
With standard cable
1024 x 768
With coax cable
1280 x 1024
Connectors
(1) 6-pin RJ-11, (1) 5-pin
DIN
Indicators
LED
(1) Power; (1) CPU Selected,
(1) CPU Power per port
