1:3 Computer Graphics Video Distribution Amplifier


FREE Shipping on orders over $100

The VP-300K is a distribution amplifier for computer graphics signals with resolutions up to and exceeding UXGA. The unit takes one input, provides correct buffering and isolation, and distributes the signal to three identical outputs.

Features & Benefits

  • High Bandwidth - 400MHz (-3dB).
  • HDTV Compatible.
  • Kr-isp Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp advanced sync processing can be enabled or disabled.
  • Selectable Sync Input Impedance - 75Ω (video), 510Ω (Graphics/TTL).
  • ID Bit Control.
  • DC Coupling.
  • 3ft 15-pin HD Cable Included.
  • EDID PassThru - Passes EDID signal from display to source via output 1.

Product Use Diagram

Product Specifications

Inputs1 UXGA on an 15-pin HD connector
Outputs3 UXGA on 15-pin HD connectors
Max Output Level2.2Vpp
Diff. Gain0.03%
Diff. Phase0.03Deg
S/N Ratio72dB @5MHz
ControlsID BIT switch; Internal analog/TTL switches for setting the sync
Power Consumption5V DC; 130mA
Operating Temperature0° to 40°C (32° to 104°F)
Storage Temperature-40° to +70°C (-40° to 158°F)
Product Dimensions W, D, H4.72" x 2.81" x 0.96" (12.00cm x 7.15cm x 2.44cm)
Product Weight0.4 lbs (0.2kg)