This cable is compatible with the following ATEN units: ACS1208A, ACS1216A, CS1708A, CS1716A, CL5708, CL5716, CL1008, CL1016, KH0116, KH1508, KH1516, KH1508i, KH1516i, KL1116, KL3116, KL1508, KL1516, KL3116T, CS1708i, CS1716i, KL1508A, KL1516A, KH1508A, KH1516A, KH1508Ai, KH1516Ai, KL1508Ai, KL1516Ai
ATEN 2L1705 15 ft. MasterView Daisy Chain Cables
The cables that you use when connecting your computer to ATEN MasterView KVM switches play a very important role in the quality of the communication between the PCs and the MasterView unit. ATEN custom made cables are designed to provide the highest signal capacity along with the lowest signal loss. What this means, to you as the consumer, is that you will receive the highest quality video output even in the higher SuperVGA video modes. An Average Cable has one layer of shielding, a thin layer of mylar foil that has been cut into a very long and narrow, approximately one half of an inch wide, strip that is wound in a spiral pattern around the wires, also called leads, in order to reduce the cost of the cable. There are a few problems with this method of shielding a signal bearing cables, first and foremost among them is the fact that this wrapped foil method can "leak" RF (radio frequency) interference. Additionally the manufacturers of your average cables use very small wires to carry the information generally they use 28 or 26 AWG wires (in AWG the higher the number for the gauge the smaller the actual size of the wire) to carry their information, this is another concession to reducing the manufacturing costs of the cables. Some of your other "Premium" cables are made in the same way and with the same materials as your average cable. The manufacturers put fancy connectors on the cable then stamp the word "Premium" on the packaging and then charge you more for the cable. ATEN cables are double shielded, beneath the PVC outer insulator you will find a copper braid RF shield, then beneath that you will find the mylar foil shield. ATEN takes a single piece and enclose the signal carrying wires in a one-piece envelope. ATEN cables are manufactured with low resistance and low capacitance 24 AWG wires to ensure the best video performance.
ATEN 2L1705 Features:
- ATEN cables are double shielded to prevent RF Interference even in the most electronically noisy environments.
- ATEN cables use low resistance and low capacitance 24 gauge wire to ensure peak performance.
- VGA cables comply with UL 2919 specifications.
- Keyboard and Mouse Cables comply with UL 2464 specifications.
Requirements: For CS428 Console
|Width||13.2 in. (33.5 cm)|
|Height||9.6 in. (24.4 cm)|
|Length||18.0 in. (45.7 cm)|
|Height||13.5 in. (34.3 cm)|
|Depth||2.0 in (5.1 cm)|
|Width||8.5 in. (21.6 cm)|
|Length||16.4 ft. (5.0 m)|
|Case Wt.||28.6 lb. (12.9 kg)|
|Package Wt.||2.75 lb. (1.2 k.)|
|Unit Wt.||2.6 lb. (1.2 kg)|
|Length||16.4 ft. (5.0 m)|
|Cable Length||16.4 ft. (5.0 m)|