/ /

VGA USB IP KVM Extender with RS232 & Audio

CE790

$735.00

Discontinued
For upgrade or replacement options: Contact Us

The CE790 is a IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet. The CE790 improves on previous designs by: 1) the addition of an intuitive On Screen Display (OSD) on both the transmitter and receiver units for easy setup and operation; 2) working over a standard TCP/IP LAN via inexpensive Cat 5e cable, allowing point-to-point, point-to-multipoint, and multipoint-to-multipoint administration without the need for an additional KVM switch; and 3) the addition of an RS-232 port, on both the transmitter and receiver Units - to connect to a serial terminal for configuration, and serial devices such as touchscreens and barcode scanners. * The CE790 can be installed in point to point, point to multipoint and multipoint to multipoint configurations. Multipoint configurations require a separate purchase - contact your delear for details. * In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. If you do not know how to enable IGMP, please contact your network administrator.

 Features:

  • Remotely access computers on your KVM installation via intranet
  • Dual console operation - control your system from both the transmitter and receiver USB consoles
  • OSD (On Screen Display) on both the transmitter and receiver units
  • Supports GUI operation
  • No software required - an HTTP server is embedded in both units
  • Built-in ASIC for greater reliability and compatibility
  • USB Keyboard and USB Mouse Ports
  • RS-232 serial ports** - allows you to connect to a serial terminal for configuration, or serial devices such as touchscreens and barcode scanners
  • Audio Enabkes
  • Rack Mountable
  • Hot Pluggable
  • USB overcurrent detection and prevention
  • High resolution video - up to 1920 x 1080
  • Supports widescreen formats
  • Ultra-High quality video mode
  • Firmware upgradable
  • Auto-MDIX - automatically detects cable type
  • Note: * The CE790 AP and GUI operation instructions can be downloaded from the ATEN website (www.aten.com). ** RS-232 serial ports support Tx/Rx signals only.

Console Connectors
Monitor1 x HDB-15 (F)
Keyboard1x USB type A (F)
Mouse1x USB type A (F)
Audio1 x Mini Stereo Jack (F)
Microphone1 x Mini Stereo Jack (F)
Connectors
RS-2322 x DB9 (1M / 1F)
Power1 x DC Jack
KVM Side Connections
Keyboard, Video, Mouse1 x SPHD-15 (F)
Audio1 x Mini Stereo Jack (F)
Microphone1 x Mini Stereo Jack (F)
LAN Connection1 x RJ-45 (F)
Switches
Mode Selection1 x Pushbutton ( OSD)
Port Selection1 x Pushbutton
Emulation
KeyboardUSB
MouseUSB
Video connections
InputVGA
OutputVGA
Video ResolutionUp to 1920 x 1080
Power Adaptor Part #
for North America0AD8-0605-24EG
for Continental Europe0AD6-1605-241G
for UK0AD4-3605-241G
Environment
Operation Temperature32-122 F
Storage Temperature25 ~ 140 F
Humidity0 ~ 80% RH, Non-condensing
Housing
CaseMetal
Physical Properties
Unit Weight2.2 lbs (R + T)
Case Qty5
Case Weight11.2 lbs
Case Dimension20x 13.5x 9.2 in.
Unit Package Dimensions13x 4x 8.5 in.
Unit Weight with package2.1 lbs
Unit Dimension7.8x 3.1x 1 in.

UPC / EAN Barcode icon
UPC 672792001963
EAN 0672792001963