Avocent DSR1022 KVM Over IP
DSR1022-001
With support for multiple network devices and remote management, the Avocent DSR1022 KVM Over IP (DSR1022-001) switch gives you greater access to branch office devices. The Avocent DSR1022 KVM Over IP (DSR1022-001) switch is specifically designed for you to easily troubleshoot, reboot or even power cycle servers or serial devices in branch offices, avoiding the need for costly on-site service calls. The Avocent DSR1022 KVM Over IP (DSR1022-001) switch includes four configurable ports for maximum flexibility and supports PS/2 and USB servers. External modem support is available if your network is down. Combined with DSView 3 management software, SNMP and IPMI support, and a Web browser, the Avocent DSR1022 switch provides one-screen, BIOS-level control of your branch office's servers, routers and DSUs. Hub and spoke failover capability allows users to authenticate when a primary server is unavailable.
Avocent DSR1022 KVM Over IP (DSR1022-001) Features and Benefits:
- Compact, KVM over IP appliance integrates KVM, an external modem and power control in one solution
- Provides access to an unlimited number of servers or serial devices, no matter their location
- Includes four configurable ports for maximum flexibility when connecting to servers or serial devices
- Offers IT administrators the ability to dial into a remotely located server or serial device
- Remotely reboot the server to the BIOS level or even power cycle remote devices --- all from a single DSView 3 software interface
- Uses the same management interface for the data center and the branch offices
- Built on patented, field-proven KVM over IP technology
- Designed for multi-platform servers, including PS/2, Sun and USB
- DSView 3 software advanced security includes audit logs and the ability to assign individual user rights
Avocent DSR1022 KVM Over IP (DSR1022-001) Specifications:
| Mechanical | |
| Height | 1.72 in. (4.47 cm) |
| Width | 17.00 in. (43.18 cm |
| Depth | 8.08 in. (20.51 cm) |
| Weight | 5.3 lbs. (2.40 kg) without cables |
| Environmental | |
| Operating Temperature | 32 to 104 degrees F (0 to 40 degrees C) |
| Storage Temperature | -4 to 158 degrees F (-20 to 70 degrees C) |
| Power | |
| Operating Voltage | 100 to 240 VAC |
| Power Frequency | 50 - 60 Hz Auto Sensing |
| Input | 40W maximum |
| Supported Hardware | |
| Computers | PS/2, Sun, USB |
| Monitor | VGA, SVGA (XGA, XGA-II with adaptor), Maximum Local Port: 1600 x 1280, Maximum Remote Port using a DSRIQ module: 1280 x 1024 @ 75 Hz |
| Peripherals | PS/2 keyboard, PS/2 mouse, IntelliMouse (PS/2 only), IBM Scrollpoint, Logitech Mouseman+, Logitech Marble Plus, Logitech Marble FX and Kensington Expert mouse |
| Standards | |
| Approved Agency | UL, FCC, cUL, ICES-003, CE, GS, VCCI, MIC, C-Tick, GOST |
Question: Hello. Is there a page regarding troubleshooting with this product and a USBIAC-10?
Answer: Thank you for your inquiry. Your best bet for this type of product support would be the Avocent community support pages. If a similar question has not been answered yet, you can ask and the knowledgeable members should be able to help you out.
http://community.emerson.com/networkpower/support/avocent/
Answer: Thank you for your inquiry. Your best bet for this type of product support would be the Avocent community support pages. If a similar question has not been answered yet, you can ask and the knowledgeable members should be able to help you out.
http://community.emerson.com/networkpower/support/avocent/