/ / / /

2x Dual Link DVI Extender

EXT-2DVI-CAT6DL

$1,699.00

Discontinued
Replaced by: Gefen EXT-DVI-1CAT5-ELR
Alternative options: Contact Us

The 2x Dual Link DVI Extender over CAT-6a extends two dual-link DVI sources to two Hi-Def displays up to 200 feet (60 meters) away. Dual-link resolutions up to 3840 x 2400 are supported using four CAT-6a cables. Extending dual-link resolutions over standard DVI cables have a limitation of 15 feet. Exceeding this distance requires additional repeaters and/or boosters. The 2x Dual Link DVI Extender over CAT-6a provides a cost-effective easy-to-install solution.

Features:

  • Extends two dual-link DVI sources to two dual-link DVI displays up to 200 feet (60 meters) over four CAT-6a cables
  • Supports 1080p Full HD at 120Hz anddual-link resolutions up to 3840 x 2400 (WQUXGA)
  • EDID management with Local and Pass-through modes
  • EQ adjustment trim pots on Receiver equalize the signal to compensate for cable length and the quality/skew variances found among different CAT-6a cables
  • Locking Power Supplies
  • Rack mountable (rack ears included)
  • Maximum Pixel Clock: 2 x 165 MHz
  • Input Video Signal: 1.2V p-p
  • Input DDC Signal: 5V p-p (TTL)
  • Video Input Connector (Sender): (2) DVI-I, 29-pin, female (digital only)
  • Video Output Connector (Receiver): (2) DVI-I, 29-pin, female (digital only)
  • Link Connectors (Sender / Receiver): (4) RJ-45
  • Power Supply (Sender / Receiver): 5V DC, Locking
  • Power Consumption: 20W per unit (max.)
  • Operating Temperature: +32 to +104 °F (0 to +40 °C
  • Dimensions: (W x H x D): 17.5" x 1.7" x 4.3" (435mm x 45mm x110mm)