/ / /

Gefen EXT-CAT5-1600HD: DVI & USB2.0 KVM Extender For Up to 200 feet (60m)

EXT-CAT5-1600HD

$1,397.00$974.65
Save $422.35
FREE Shipping on orders over $100

The Gefen EXT-CAT5-1600HD extends DVI-D and USB 2.0 peripherals up to 200 feet (60m) from a computer at 1920x1200 using two CAT-5e/CAT6 cables. The unit includes a built-in 4-port USB 2.0 hub located on the Receiver unit, providing complete computer access control at the remote location.

How It Works
Connect the host computer's DVI and USB ports to the Sender unit. Connect the remote display and computer peripherals to the Receiver unit. Two CAT-5 cables (for the DVI and for the USB 2.0) extensions connect the Sender and the Receiver units together. Power up the units, and a crisp picture will appear on the display.

Note: The Gefen CAT5-1600HD is HDCP compliant, enabling the viewing of protected content on the remote extended display. The Gefen CAT5-1600HD supports digital DVI-D only, not analog DVI-A. Sources and connecting cables must be DVI-D compatible. USB 1.1 is also supported.

Gefen EXT-CAT5-1600HD Features:

  • Extends any DVI compliant device up to 200 feet (60 meters) from the computer at 1920x1200
  • Extends USB 2.0 compliant devices up to 300 feet
  • DVI is transmitted digitally for zero signal loss over CAT5 cable
  • Supports video resolutions up to 1080p and 1920x1200
  • HDCP compliant for viewing of copy-protected video content (e.g., Blu-ray)
  • Supports DDWG standard for DVI compliant monitors
  • Supports legacy USB 1.1 devices
  • Includes rack ears


Gefen EXT-CAT5-1600HD Extender Back View

Gefen EXT-CAT5-1600HD Package Includes:

  • (1) CAT5-1600HD Sender unit
  • (1) CAT5-1600HD Receiver unit
  • (1) 6 foot DVI to DVI Cable
  • (1) 6 foot USB 2.0 Cable
  • (2) 5V Power Supplies with Locking Power Connectors
  • (1) Set of Rack Ears
  • (1) User's Manual

Gefen EXT-CAT5-1600HD Specifications:

Mechanical  
Height 1.75 in. (4.45cm.)
Width 17 in.(43.18 cm.)
Depth 4.375 in. (11.11 cm.)
Weight 7 lbs. (3.18 kg.)
Power  
Video Amplifier Bandwidth 165 MHz
Single Link Range 1080P, 1920 x 1200
Input Video Signal 1.2 Volts p-p
Input DDC Signal 5 Volts p-p (TTL)
Operating Voltage 20 Watts (max) per power supply
Power Supply (2) 5V DC / 4A
Supported Hardware  
DVI Connector DVI-I (29 pin) female (DVI-D digital signal only)
USB Input (sender) USB type "B" connector
USB Output (receiver) four USB type "A" connectors
Link Connectors (2) RJ-45 Shielded
Standards  
Approved Agency HDCP Compliant

 

UPC / EAN Barcode icon
UPC 845344068763
EAN 0845344068763