/ /

Gefen 1:2 DVI Distribution Amplifier

EXT-DVI-144

$299.00

Discontinued
Recommended replacement: Aten VS172
Alternative options: Contact Us

Gefen's DVI Splitter is a stackable distribution hub that sends the same DVI graphics source to two or more DVI digital displays (flat panels or projectors). It is a flexible solution that accommodates multiple digital video displays, and when multiple DVI Splitters are connected together, they can be used to create a 1:4 or a 1:x6 distribution (one DVI input / multiple DVI display outputs). When multiple units are stacked you can switch between all the inputs into all the outputs with the RMT-16 remote control. The configuration of stacking multiple units must be done by Gefen professionals.

How it works

The DVI Splitter is connected with a DVI (male to male) cable from the DVI graphic source to the DVI Splitter input. There are two DVI outputs in each module. DVI output one is the primary connection and is used for the main display. DVI output two follows the main display. The DVI Splitter is using a unique DVI Bus technology to connect multiple splitters without sacrificing a DVI output connection.

The DVI displays attached to the Splitter must be able to run at the same native resolution.

Note: The DVI Splitter will only output a DVI-D (DVI digital) signal. If your using a DVI-I cable, it will ONLY pass the digital signal. Using a DVI-I to VGA adapter off of any output will not pass an analog signal. A DVI-D to VGA converter is required to convert to an analog signal.

 

Gefen 1:2 DVI Distribution Amplifier (EXT-DVI-144)

Gefen 1:2 DVI Distribution Amplifier
 

Specifications  
DVI Amplifier Bandwidth: 1.65 GHz
Actual Bandwidth:  1.6 GHz
Input Video Signal: 1.2 Volts p-p
Input DDC Signal: 5 volts p-p (TTL)
DVI Connector: Molex 24 pin female connector
Remote Connector: RJ-11
Power Consumption: 15 Watts (max.)
Power Supply: External 5VDC
Dimensions: 4.5"Wx1"Hx5.2"

Package Includes::

The DVI splitter
6ft DVI cable M-M
5v Power Supply