Gefen 2xVGA Extender
EXT-VGA-CAT5-142
The Gefen EXT-VGA-CAT5-142 is a 2xVGA Extender which allows you to extend VGA video at great distances, up to 1,000 feet from the video source. A single industry-standard CAT5 cable is used to carry the video signal. The 2xVGA receiver unit has two VGA video outputs, so you can connect more than one monitor if so desired at the remote location.
How this VGA extender works:
You hook up the 2xVGA sender unit to your VGA video source using the supplied 6-foot VGA mating cable, then run your CAT-5 cable to the 2xVGA Receiver unit. At the remote end, connect your display(s) to the 2xVGA Receiver and your video will be extended flawlessly.
Gefen 2x VGA Extender Receiver Unit Backside
Gefen 2x VGA Extender Sender Unit Backside
Gefen 2x VGA Extender Features:
- Extends any VGA video source up to 1000 feet away
- Uses only one CAT-5 cable for extension
- Supports resolutions up to 1080p, 2K, and 1920 x 1200
- Allows up to 2 VGA displays at the remote end
Package Includes:
- VGA Extender S Sender Unit
- VGA Extender R Receive Unit
- (1) 6 foot VGA cable (M-F)
- (1) 5V external power supply
Gefen EXT-VGA-CAT5-142 Specifications:
| Mechanical | Sender | Receiver |
| Height | 1 in. (2 cm.) | 1 in. (2 cm.) |
| Width | 1 in. (2 cm.) | 3 in. (8 cm.) |
| Depth | 4 in. (10 cm.) | 4 in. (10 cm.) |
| Weight | 3 lbs. (1 kg.) | |
| Power | ||
| Supply | 5V DC | |
| Consumption | 5 watts (max.) | |
| Connectors | ||
| Video In | HD-15 male | |
| Video Out | (2) HD-15 female | |
| Link Connector | RJ-45 Shielded | |
| Input Signal | ||
| Video | 1.2 volts p-p | |
| Sync | 5 volts p-p (TTL) | |
| Frequency Range | ||
| Horizontal | 15-70 KHz | |
| Vertical | 30 - 170 Hz | |
| Video Amplifier Bandwidth | 350 MHz | |
