Adder RED PSU Pro - 16 Output Rack Power Supply for Adder products


Coming Soon...

For Government Pricing Contact Us

Adder RED-PSU PRO provides your installation with the power to evolve to fit your need. Housed within a 1U 19-inch rack-mount module, RED-PSU PRO provides up to 16 power 12VDC outputs, hot-swappable power modules, and remote management.

  • 8 or 16 port independently controllable
  • 12V outputs
  • 2 hot swappable power modules
  • Controllable via secure HTTP interface,
  • REST API for 3rd party control integration,
  • 900,000hrs MTBF ratings on power modules
  • 12V to 5V cable converters available for units with 5V power feeds

Adder PSU-RED-PRO Apllication Diagram

ADDER PSU-REDPRO1-16 Application

Power to match your needs
While individual Adder power adapters perform well, as your installation expands and its devices proliferate, separate adaptors can become unwieldy and difficult to manage. ADDER RED-PSU PRO (RED-PSU PRO) provides a significant step up in terms of efficiency, reliability and power management.

Hot swappable power modules
Conversion from the mains AC supply to low voltage DC occurs within either one, or two switched mode 495W power modules, which slot into the rear of the RED-PSU PRO chassis. A single power module is rated at 900,000 hrs MTBF and this can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module can be included in the second module bay. With two power modules fitted, the normal load will be intelligently balanced between them on an equal basis; with full load transferring immediately to one should the other cease operation.

Power integrity, safety and management are core components of the RED-PSU PRO system. At start up, RED-PSU PRO enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device.

Web interface control
RED-PSU PRO can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. Web interface security is by HTTP digest authentication (RFC 2617) with username and password as requested information.

A REST (Representational State Transfer) API is available with all functionality to which authorized 3rd party control systems can interface.

Adder PSU-REDPRO1-16 Specifications:

Height 44mm/1.73"
Width 435mm/17.13"
Depth 275mm/10.8"
Weight 4.5kg / 9.9lbs
Mains Inputs - 2x IEC 90-264VAC 47/63Hz input
- Efficiency 94% @50% load
- Power Factor 0.9 MIN typical
Peripheral Connections 1x 8p8c for 10/100 Ethernet connection
Power Outputs 1x 8p8c for 10/100 Ethernet connection.
Operating Conditions  
Temperature 0 to 50°C/32 to 122°F
Humidity 10-95% Non condensing
Altitude < 2000 Meters / 6500 ft
Mean Time Between Failure (MTFB) - PSU-REDPRO(x)-8 = 1,000,000hrs
- PSU-REDPRO(x)-16 = 600,000hrs
Local client requirements Browser versions: Internet Explorer 10,11, Firefox 24 ESR and above, Chrome™ 44 or above
Approvals CE/UKCA/FCC/ICES/cULus