1U 19" Rack Mount Monitor Keyboard Drawer Short Depth Model with Samsung TFT LCD



Recommended replacement: RP-119
Alternative options: Contact Us

RP1419 is a monitor with a flip-up design rack-mountable drawer, adjustable brackets, built in LCD OSD to provide effective assistant for an administrator to control multiple PCs RP series provides cost effective for your limited IT budget over using CRT and rack mounting. The monitor is featured as a Samsung grade A industrial TFT LCD Panel 19 inch touchscreen with a resolution of 1,280 x 1,024 and a contrast ratio of 500:1.

RP1419 Features:

  • 1U 19" LCD screen
  • 480 mm. deep for  19" LCD display
  • Adjustable mounting brackets from 390 to 680 mm
  • Slide away flip-up monitor
  • Allow viewing through closed glass cabinet door
  • Lightweight aluminum construction - with a black anodize finish
  • Built in on screen display controlled by integral membrane switches
  • Front-access lock for security
  • Lock out rails to prevent movement of the screen
  • All mounting hardware included

RP1419 Specifications:

Height 1.75 in. (44.45 mm.)
Width 17.4 in. (441.9 mm.)
Depth18.9 in. (480 mm.)
Weight28.6 lbs (13 kg.)
Operating Temperature32°F to 122°F (0°C to 50°C)
Storage Temperature77°F to 149°F (-25°C to 65°C)
HumidityRelative Humidity 90%, non condensing
Operating Voltage110 or 220 VAC at 50 or 60 Hz via AC adapter
Power Frequency6A
ComputersMulti-platform - Mix PCs, SUNs, IBMs, HPs, DELL
MonitorHD 15 VGA, analog RGB, Touch screen
PeripheralsVideo input and DC power
Question: will this fit in a SBC 6u case with Int Depth Front Rack to Back Lid of 19.88"
Answer: Thank you for your inquiry. The RP-1419 is 18.9 inches deep. So if you vertical mounting rails are placed further apart that that, you should be fine. Please make sure you have universal square mounting holes on the rails. You can see the specification sheet here: