Adder AdderLink INFINITY Extender Pair includes Receiver & Transmitter



Replaced by: Adder ALIF2002P
Alternative options: Contact Us

This product is no longer sold in a pair. To purchase each unit seperately, please see related products listed to the right, or visit: alif2000r-us and alif2000t-us.

The AdderLink INFINITY ALIF2000P-US Extender pair includes a receiver and transmitter with Dual head or Dual Link DVI, USB and audio for extension over Gigabit ethernet or Fiber. This product interfaces USB peripherals, such as keyboard and mouse, together with DVI for full DVI video display delivering signals, of an unlimited distance, from your computer to your digital panel (i.e. LCD). The Adderlink Infinity allows for this without the need to convert signal types from the digital domain. With intelligent video encoding, this product has the capability to process full screen moving video in real time. You can configure your network topology to best suit your needs by extending one computer to one user by connecting your receiver and transmitter via CATx cable or fibre. Distance can be unlimited with the use of daisy chaining standard network cables and switches that will deliver IP traffic up to 100 meters away each. Because of the efficient manner in which ADDERLink INFINITY constructs data for IP transmission, you can make use of standard wireless routing to connect these receiver and transmitter units to your network. This unit can be mounted by rack, desktop, wall or attached to the back of your monitor using an optional VESA mounting carriage.

Adder ALIF2000P-US Features:

  • Distance can be unlimited
  • USB 2.0 connectivity
  • DVI signaling
  • 1:1 pixel mapping
  • Intelligent Video Encoding
  • USB True Emulation
  • Digital Stereo Audio
  • Custom network topology configuration

AdderLink INFINITY Specifications:

1.76 in. (44 mm.)
7.92 in. (198 mm.)
6 in. (150 mm.)
2.7 lbs. (1.1 kg.)
Operating Temperature
0°C to 40°C / 32°F to 104°F
Operating Voltage
5VDC 12.5W output from power adapter
Power Frequency
100-240VAC 50/60Hz
2.5mm DC jack (power adapter included) 0.4A, input to power adapter
Supported Hardware
DVI (incl. dual head and dual link)
USB, Audio, RS232 - requirement dependent
Approved Agency
Tx Connections
DVI-D x 2, Audio 3.5mm in, Audio 3.5mm out, USB type B, RS232 9 pin D-Type
Rx Connections
Video: DVI-D x 2, Audio 3.5mm in, Audio 3.5mm out, USB type A x 4, RS232 9 pin D-Type

This part was also known as Adder ALIF2000P-US, ALIF 2000P, and ALIF-2000P.

Question: What is the maximum distance using Cat6 cable before a switch would need to be added or we should use fiber?
Answer: Please call us at 1-877-586-6654 to discuss your project. For direct links over Ethernet cable, the length of cable should not exceed 100 meters (328 feet), but there may be other options available depending on your requirements.