NTI SM-8X2-15V-LC Video Matrix Switch, 8 input and 2 output
The Network Technology SM-8X2-15V-LC VGA Video Matrix Switch allows you to route 8 video sources directly to 2 video displays via remote access. Mounted in 1U of rackmount space or individually, this VGA switch router will drive standard VGA cables thus eliminating the need for external interfaces and coax cable connections via BNC connectors. Signals from a range of input sources can be distributed to various output devices, in essence creating a "matrix" pattern of interconnection possibilities. A single computer video output can be routed to one or more monitors. Each image will be as crisp and clear as if directly connected to the original source. Each video output is buffered from each input, insuring signal integrity throughout the system. Control switching easily via front panel interface, RS232 control, ethernet control and infrared remote control. The VEEMUX switch is the ideal solution for any digital signage application where information is being presented: classrooms, boardrooms, trade shows, conferences, various facilities, courtrooms, command centers, control rooms, etc.
Note: * Interface cables required for proper operation are not included. See Recommended Accessories.
NTI SM-8X2-15V-LC Features and Benefits:
- Connect up to 8 video sources directly to 2 video displays remotely
- Configure & control via Ethernet, serial port, front panel buttons, or IR remote controls/li>
- Independently connect each input to any or all outputs
- Video bandwidth is 200 MHz or greater.
- LCD front panel displays
- Supports 1920x1200 video resolution
- Display refresh rate of 85 Hz
- Stand-by mode offers reduced power
- 2 Year Warranty
|Height||1.75 in. (44.4 mm.)|
|Width||19 in. (482.6 mm.)|
|Depth||& 7.7 in. (195.5 mm.)|
|Input||(8) Female 15-pin HD connectors, 75 Ohms|
|Output||(2) Female 15-pin HD connectors, 75 Ohms|
|Bandwidth||200 Mhz, fully loaded|
|Operating temperature||32 to 100°F |
(0 to 38°C)
|Storage temperature||-20 to 140°F |
(-30 to 60°C)
|Relative Humidity||17 to 90% non-condensing RH|
|IEC connector||110 or 220 VAC |
at 50 or 60 Hz
|Approved Agency||CE & RoHS|
This product is the replacement for the SM-8X2-15V-LCD.