4x4 1080p HDMI Multiviewer / Video Matrix Switch / Video Wall Processor

SPLITMUX-4X4-HDVWC

$2,160.00$1,986.21
Save $173.79
FREE Shipping on orders over $100

The NTI SPLITMUX-4X4-HDVWC 4x4 1080p HDMI Quad Screen Multiviewer is a multi-purpose high-speed video processing system that can be configured for three different output modes. Route HDMI video and audio signals from four video sources to four displays. Display real-time 1080p video from four sources simultaneously on each display. In Multiview Mode, it is capable of displaying the four video sources in quad, PiP, full screen, or custom display modes, with all four monitors simultaneously displaying the same image. In Matrix Mode, digital HDMI video and audio signals are routed from four HDMI video sources to four displays. In Video Wall Mode, video from a single source is displayed across all four monitors.

NTI SPLITMUX-4X4-HDVWC Application Diagram

  • Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.
  • Each input can be independently connected to any or all outputs.
  • Quad, Picture in Picture, Full Screen, and Custom display modes.
    • Custom Display Mode: the size, position and selection of any or all windows are customizable.
      • 2- and 3-source viewing is possible with this method.
    • Fluid, real-time video performance with 60 frames per second (fps) in all four quadrants.
    • When in Multiview mode, all four monitors simultaneously display the same image.
  • Supports 2x2 video wall configuration with displays in landscape (horizontal) orientation.
  • HDCP 1.4 compliant.
  • HDMI features supported:
    • HDMI 1.3
    • 10-, 12-, and 16-bit xvYCC, RGB, and YCbCr.
    • Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, DTS, LPCM 7.1, and LPCM 2.
    • Bandwidth up to 340 MHz (8 Gbps)
    • Lip Sync
  • Configure and control the multiviewer through front panel buttons, Ethernet, IR remote control, or RS232.
  • Switch audio independently of video from connected HDMI sources (e.g. source 1 and source 2 video are active while only source 3 audio is active).
  • Any DVI source can be connected by using the DVI-HD-xx-MM cable (not included).
  • Built-in EDID table
    • Option to copy EDID from any sink to one or all sources.

NTI SPLITMUX-4X4-HDVWC Use Cases

The SPLITMUX 4x4 HDMI Quad Screen Multiviewer is a multi-purpose high-speed video processing system that can be configured for three different output modes:

4x4 Video Matrix Switch Configuration

Display the video from one HDMI video source across four 1080p HDMI monitors. Custom view modes are also available to view multiple video sources on each HDMI monitor.

NTI SPLITMUX-4X4-HDVWC 4x4 Video Matrix Switch Configuration

Multiviewer Configuration

Display the video from up to four HDMI video sources across up to four 1080p HDMI monitors in Multi-Viewer mode. NTI SPLITMUX-4X4-HDVWC lets you set infinite diffent view modes from Quad View Mode, to Picture-in-Picture Mode, Full Screen Mode, and Custom Mode where screen sizes and positions are customizable.

NTI SPLITMUX-4X4-HDVWC MultiViewer Configuration

2x2 Video Wall Configuration

Display the video from one HDMI video source across four 1080p HDMI monitors.

NTI SPLITMUX-4X4-HDVWC 2x2 Video Wall Configuration

Display Mode Examples

NTI SPLITMUX-4X4-HDVWC Display Modes = Quad Mode, Full Screen, Picture in Picture (PiP), and Custom Mode
Quad Mode
  • In quad mode, the screen is split into four fields of equal size each displaying the entire contents of four different video sources.
  • Fluid, real-time video performance with 60 frames per second (fps) is all four quadrants.
Full Screen Mode
  • In full screen mode, one of the four video sources is displayed in full screen size and maximum resolution.
Picture in Picture (PiP) Mode
  • In PiP mode, the full screen display of one of the four video sources is accompanied by three small images (thumbnails) of the three other video sources allowing simultaneous monitoring.
    • If there is no video source connected to the thumbnail, its screen will remain black.
Custom Mode
  • In Custom (Advance) mode, each video source is displayed in its own separate, detached window.
  • Size, position and selection of the windows are customizable.
  • Use web server graphical user interface to configure settings for each window.
  • Presets of the window positioning can be saved.
  • Borders can be set for each image input.

SPLITMUX-4X4-HDVWC Package Contents

NTI SPLITMUX-4X4-HDVWC Package Contents

  • (1) NTI SPLITMUX-4X4-HDVWC
  • (1) 1U 19" Rack Mount Kit
  • (1) IR remote
  • (1) US Power Adapter
  • (1) Manual
  • (1) 2-Year Standard Warranty

SPLITMUX-4X4-HDVWC Resources

NTI SPLITMUX-4X4-HDVWC Manual NTI SPLITMUX-4X4-HDVWC Brochure (PDF)
NTI SPLITMUX-4X4-HDVWC Manual (PDF)

NTI SPLITMUX-4X4-HDVWC Specifications

Dimensions (H x W x D)1.75 x 19 x 6.96 in. (44 x 483 x 177 mm)
Inputs
  • Four HDMI input connectors.
  • Supports digital HDMI devices such as DVD/Blu-Ray players, satellite receivers and HDTV tuners.
  • A DVI source can be connected by using the DVI-HD-xx-MM cable (not included).
  • Supports HDCP 1.4
Outputs
  • Four female HDMI output connectors.
  • HDMI-embedded audio switching (four-channel stereo mixing).
  • Supported resolutions
    • 480p@50/60Hz, 576i@50/60Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@24/25/50/60Hz
    • Computer resolutions to 1920x1200.
  • Supports HDCP 1.4
Power
  • Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter (AC adapter included.)
  • Output: 12VDC, 4.16A
  • Power consumption: 15W
Environmental
  • Operating temperature: 32°F to 131°F (0°C to 55°C).
  • Storage temperature: -4°F to 185°F (-20°C to 85°C).
  • Operating and storage relative humidity: up to 95% non-condensing RH.
Regulatory ApprovalCE, FCC, RoHS
Warranty2-Years
Cables
  • Use HD-xx-MM HDMI cables to connect an HDMI source or display up to 50 feet away from the multiviewer.
  • Use DVI-HD-xx-MM cable to connect a DVI source or displays.
  • Cables not included.
Compatible NTI Products
  • Combine NTI's extenders, switches, splitters and cables for complex applications.