/ / /

Rose UltraMatrix AV, 16x16 DVI Matrix Switch

UMA-16DX16D

$9,999.00$8,749.13
Save $1,249.87
FREE Shipping on orders over $100

The Rose UMA-16DX16D is an UltraMatrix AV, 16x16 DVI Matrix Switch. The UltraMatrix AV DVI-D matrix switch is an ideal addition to new or existing installations that need to display 1 to 16 video sources to 1 to 16 remote DVI-D displays. Pick one video source and display it on 1, 2 or all monitors. Easy front panel selection of the video source to displayed on each remote monitor. Just push a button and select the source, then select the destination port. The front panel display shows which computers are connected to the displays. Selection can also be performed by using the provided RoseControl software that sends switching command to the unit. With one click on the cross-point, that computer's video is instantly switched to the selected DVI-D monitor. These commands are sent using the RoseControl software installed on a computer or laptop and connected to the RS232 port on the unit.

The UltraMatrix AVI DVI Matrix Switch is basically a plug and play device that connects between 1 to 16 computers and 1 to 16 DVI-D monitors. Each computer's video can be switched to one or more output monitors. The switching can be performed by the front panel push buttons or by using the provided RoseControl software which sends the switching commands fro a controlling computer or laptop to the RS232 port. Installation is a very easy and simple procedure. Connect a DVI male to male cable from each computer to the units input ports. Next, connect the DVI-D monitors to the unit directly or with a DVI male to female extension cable. The Switch can be controlled from a connected computer or laptop running RoseControl interface sofware. This software allows you to easily select with computer's video displays on which DVI monitor. Each of the video sources can be routed to any video output port. Route video source #1 to output #1 and source #2 to output #2, #3, #10, and #14 by simply clicking on the source-destination cross-point.

 

Rose UMA-16DX16D Backview

Rose UMA-16DX16D Backview

Rose UltraMatrix AV DVI Features:

  • Independently display the contents of up to sixteen computers on up to sixteen DVI-D displays
  • Non-blocking, single-link DVI-D matrix switch
  • Max TMDS rate of 2 x 1.65 Gb/sec
  • Resolutions up to 1920 x 1200 Unique "Learn Mode" determines the specs for any output monitor. Once learned, the monitors do not have to be connected for the computers to boot
  • Switch a video source to any output monitor using the front panel push buttons or sending serial commands to the unit
  • Intuitive RS232 software control (RoseControl) makes switching, routing, and controlling the video displays quick and easy
  • Optional IR, USB, and TCP/IP control
  • DVI-D video transmission distance up to 30 feet
  • Set-up multimedia presentations where information is displayed from several computers
  • Automatic receiver equalization
  • Rack-mountable chassis

     

Rose UltraMatrix AV DVI Application Diagram

Rose UltraMatrix AV DVI Application Diagram

Rose UltraMatrix AV DVI Specifications: :

Mechanical  
Width 19.0 in. (48.2 cm.)
Height 5.25 in. (13.36 cm.)
Depth 7.0 in. (17.8 cm.)
Weight 10.0 lbs. (4.53 kg.)
Video  
Single link DVI-D
Resolution 1920 x 1200
Pixel Clock 165 MHz (Max)
Video In DVI-D
Connectors  
DVI in DVI-I 29 pin female
DVI out DVI-I 29 pin female
RS232 DB9F
Power IEC 320 or power adapter
Controls  
Front Panel Select/Up/Down selector buttons
Software RoseControl software
Power  
Adapter 100-240 VAC, 50-60 Hz, 60 Watts
Approvals CE, ROHS Compliant

Accessories