/ /

2x1 Computer Graphics Video & Stereo Audio Standby Switcher

VP-211K

$225.00
FREE Shipping on orders over $100

The VP-211K is a high-performance switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. When configured as a standby switcher, it switches to the secondary input upon loss of the primary input.

Features & Benefits

  • Primary Input - Selectable.
  • Active Input LED Indicators.
  • High Bandwidth - 300MHz (-3dB).
  • Looping Input - Input 1.
  • Control - Automatic or contact closure.
  • Kr-isp Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp advanced sync processing can be enabled or disabled.
  • Automatic Standby Switching - Switches from secondary input to primary input when a signal is detected.
Product Use Diagram

Product Specifications

Inputs2 computer graphics video with loop on 15-pin HD connectors; 2 unbalanced stereo audio on 3.5mm mini jacks
Outputs1 computer graphics video on a 15-pin HD connector; 1 unbalanced stereo audio on a 3.5mm mini jack
Max Output LevelVideo: 1.6Vpp; Audio: >10.5Vpp
BandwidthVideo: 300MHz; Audio: >100kHz
Diff. Gain0.03%
Diff. Phase0.03Deg
K-Factor<0.05%
S/N RatioVideo: 71dB; Audio: 71dB weighted
CrosstalkVideo: -59dB @5MHz; Audio: <-66dB @1kHz
ControlsContact closure remote control; Input default selection switch
CouplingDC
Audio THD + Noise<0.032%
Audio 2nd Harmonic<0.004%
Power Consumption5V DC; 200mA
Operating Temperature32° to 104°F (0° to +40°C)
Storage Temperature-40° to 158°F (-40° to +70°C)
Humidity10 - 90% Non-condensing
Product Dimensions W, D, H4.72" x 2.81" x 0.96" (12.00cm x 7.15cm x 2.44cm)
Product Weight0.4 lbs. (0.2 kg)