Component Video to DVI Converter/Extender via Fiber Cable to 1,640 ft
CMP-DVI-FOSC
Save $73.62
The Component Video to DVI Converter/Extender converts component video into a DVI signal that can be extended up to 1,640 feet (500 meters) using single-strand multimode SC fiber optic cable.
The Converter/Extender system has two components: the component video converter/transmitter, which connects to the component video source and also supplies video to a local component video display, and a ST-1FODVI-R-SC500M receiver that connects to a remote DVI monitor. The units are interconnected by a single-strand multimode SC fiber optic cable.
Product Features and Benefits
- Convert a video source with component video signal to an digital DVI signal.
- Use with an optical receiver (ST-1FODVI-R-SC500M) to extend a remote DVI monitor 1,640 ft (500m).
- Signal transmission via a single-strand (simplex) multimode (50-micron or 62.5 micron) SC fiber optic cable - no RF interference.
- Supports resolutions to 1080p (1920x1080).
| Video Input | Three female RCA connectors for component video input. |
| Video Output | Three female RCA connectors for component video output. One female SC fiber connector for optical DVI output. Supports resolutions to 1080p (1920x1080). |
| Power | 100 to 240 VAC at 50 or 60 Hz via AC adapter. |
| Environmental | |
| Operating Temperature | 32 to 122°F (0 to 50°C) |
| Storage Temperature | -22 to 158°F (-30 to 70°C) |
| Relative Humidity | 0 to 85% non-condensing RH |
| Dimensions | WxDxH in: 4.09x4.41x1.10 (104x112x28 mm) |
| Weight | 1.8 lb (0.82 kg) |
| Approvals | CE, FCC, RoHS |
| Warranty | Two Years |
