The NTI VOPEX-C5V-4C Video Splitter/Extender allows you to broadcast up-to-the-minute information to multiple remote monitors in real time using. This high-resolution VGA video splitter (video port expander) drives video from one computer to 4 remote monitor screens up to 600 feet away via inexpensive CAT5 UTP cable. This is the ideal solution for any application requiring the flexibility to share information with several locations.
The VOPEX VGA Video Splitter/Extender system has two components: the VOPEX-C5V VGA broadcast unit, which connects to the host computer and also supplies video to a local monitor, and an XTENDEX ST-C5V-R-600 remote unit (sold separately) for each remote monitor, see accessories. This unit is ideal for digital signage, lobbies, point of purchase displays, conference centers, airports, and other applications that require multiple displays. 3-foot (0.91-meter) VGA cable included.The units are interconnected by CAT5 cable.
NTI VOPEX-C5V-4C Features & Benefits:
- Broadcast real-time VGA video to multiple display locations.
- Maximum 1024x768 video resolution at 600 feet; higher resolutions are supported at shorter distances.
- Easily expandable. Add remote units as you add monitors.
- Compatible with all NTI A/V switches and splitters, which enables the joining of products to create a system that satisfies all of your networking needs.
- Inexpensive CAT5 cable replaces bulky video cables.
- A pure hardware solution - no software conflicts.
NTI VOPEX-C5V-4C Specifications:
|Operating Temperature||32°F to 100°F (0°C to 38°C)|
|Storage Temperature||-20°F to 140°F (-30°C to 60°C)|
|Relative Humidity||17 to 90% non-condensing RH.|
|Operating Voltage||110 or 220 VAC at 50 or 60 Hz via AC adapter|
|Power Consumption||10 W|
|Supported||PC, SUN and MAC|
|Connector||Male 15-pin HD|
|Frequency ranges||Horizontal: 15 kHz to 130 kHz. |
Vertical: 30 Hz to 150 Hz
|Input impedance||75 Ohms|
|Maximum input levels for video||1.45 p-p|
|Supports Separate and Composite TTL level sync and Sync on Green.|
|Video is DC coupled.|
|HD connector||Female 15-pin for local monitor|
|Output connector||Female RJ45 for remote monitor|
|Compatible with:||SVGA, XGA, and VGA|
|Output impedance||75 Ohms|
|Maximum output level||1.45Vp-p|
|Approved Agency||6 ft. (1.83 m.)|
|3-foot VGA cable included|
|CAT5, CAT5e or CAT6 UTP straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).|
|Regulatory Approvals||CE, RoHS, & Electrostatic Discharge (ESD) immunity IEC/EN 61000-4-2|