NTI Remote VGA Video & Audio Receiver


Save $24.54
Interface: VGA + Audio
Transmitter or Receiver: Receiver
FREE Shipping on orders over $100

The NTI ST-C5VA-R-600 is a VGA video and audio remote receiver with a maximum extension of 600 feet between the local and remote units. The ST-C5VA-R-600 works with the NTI CAT5 extenders and KVM Switches to create a high performance audio/video signal routing system.

  • Video quality adjustment for different lengths of CAT5/5e/6 cable is done manually for video-only units and automatically for audio/video units.
  • When using CAT6, some degradation may be experienced depending on the length of the cable.

For Video only capabilities please see VOPEX-C5V-4 (local extender) and ST-C5V-R-600 (remote unit).

NTI ST-C5VA-R-600 Specifications:

Connector Female 15-pin HD connector
Supported resolution up to 1920x1440
Output impedance 75 Ohms.
Maximum output level 1.45Vp-p.
Stereo audio plug 3.5mm
Frequency response 20 Hz to 20 kHz, +/-1dB.
Signal-to-Noise Ratio (SNR) 76 dBA.
Total Harmonic Distortion and Noise (THD+N) 0.017%
Stereo crosstalk -70 dB.
Maximum output levels 3.1Vp-p (line level)
Line level output supports multimedia speakers
Require powered speakers
Operating Voltage 110 or 220 VAC
Power Frequency 50 or 60 Hz via AC adapter
Power Consumption 10W
Add the PWR-48V-9V0,6A or PWR-12V-9V0,6A DC-DC power converter to install the local unit in a Telecom environment.
MTBF 82,214 hrs
Operating temperature 32°F to 100°F (0°C to 38°C)
Storage temperature -20°F to 140°F (-30°C to 60°C)
Relative Humidity 17 to 90% non-condensing RH
Regulatory Approvals CE