Fiber Optic VGA Extender via One LC Singlemode or Multimode Fiber Optic Cable

ST-FOVARS-LC

$1,045.00$960.92
Save $84.08
FREE Shipping on orders over $100

The XTENDEX® VGA Extender via Fiber Optic Cable locates a VGA display, stereo audio speakers and RS232 up to 6.2 miles (10 kilometers) away from a computer using a single LC singlemode fiber optic strand and 1,640 feet (500 meters) using multimode fiber optic cable. Each extender consists of a transmitter that connects to a computer and also supplies video to a local monitor, and a receiver that connects to a monitor.

Benefits and Features

  • Signal transmission via single-strand LC fiber optic cable - no RF interference.
    • Using singlemode 9-micron cable, extend to 6.2 miles (10 kilometers).
    • Using multimode 50-micron or 62.5-micron cable, extend to 1,640 feet (500 meters).
  • Supports local and remote VGA monitors.
  • Supports computer resolutions to 1920x1080.
  • Supports stereo audio speakers.
    • Can be used as an audio-only extender.
  • Plug and play functionality - no software needed.
  • Low RFI/EMI for sensitive applications.
  • Built-in default EDID table.
  • Supports the DDC2B protocol.
  • Cables can be installed in conduit prior to extender installation.

Package Includes:

  • One transmitter unit
  • One receiver unit
  • Two SFP modules for fiber connection
  • Two power supplies
  • User manual

Cables

  • Use a simplex LC singlemode 9-micron fiber optic cable to extend the receiver from the transmitter up to 6.2 miles (10 km).
  • Use a simplex multimode LC 50-micron or 62.5-micron fiber optic cable to extend the receiver from the transmitter up to 1,640 feet (500 meters).
  • Cables not included.
Local Unit 
Supports a PC, SUN, or MAC with VGA video.
Multiplatform support: Windows 2000/XP/Vista/7/8/10, Windows Server 2000/2003/2008/2012, Solaris, Linux, FreeBSD, and MAC OS 9/10.
Supports resolutions to 1920x1200 at 60 Hz.
One female 15-pin HD connector for computer connection.
 One female 15-pin HD connector for local VGA monitor.
One female 3.5mm stereo audio jack.
 3-pin screw terminal for RS232.
One simplex LC fiber optic port for sending video/audio signals and DDC signal.
Remote Unit 
Resolutions supported by EDID table: 1920x1080, 1280x1024, 1280x768, 1280x720, 1024x768, and 800x600 @ 60Hz.
One female 15-pin HD connector.
One female 3.5mm stereo audio jack.
 3-pin screw terminal for RS232 - Self-adaptive baud rate.
One simplex LC fiber optic port for sending video/audio signals and DDC signal.
Power
Local and remote unit: 100 to 240 VAC at 50 or 60Hz via AC adapter.
Power consumption: 6W max.
Environmental
Operating temperature: 23 to 158°F (-5 to 70°C).
Operating and storage relative humidity: 5 to 90% non-condensing RH.
Mechanical
Height0.99 in. (25mm)
Width6.06 in. (154mm)
Depth4.53 in. (115mm)
Max Distance
 6.2 miles (10 km) over 9µm singlemode LC fiber optic cable.
1,640 feet (305 meters) over 50µm or 62.5µm multimode LC fiber optic cable.
WarrantyTwo Years