/ / /

4K UHD HDMI HDBaseT Line Transmitter

TP-590TXR

$895.00
FREE Shipping on orders over $100

The TP-590TXR is a 4K UHD extended range, HDBaseT 2.0 transmitter for HDMI, USB 2.0, audio, bidirectional RS-232 and IR signals. It supports resolutions up to 4K@60 UHD (4:2:0). The TP-590TXR converts the HDMI, USB 2.0, audio, RS-232 and IR input signals into an HDBaseT twisted pair signal that it sends to the TP-590RXR for decoding.

  • Resolution Support - Up to 4K@60 UHD (4:2:0).
  • Maximum Data Rate - 10.2Gbps (3.4Gbps per graphic channel).
  • HDTV Compatible.
  • HDCP Compliant.
  • HDBaseT V2 Support.
  • USB Support - USB 1.1 & USB 2.0 (up to 127Mbps).
  • Supports Isochronous USB Cameras.
  • HDMI Support - Deep color, x.v.Color, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, CEC, 2K, 4K, 3D.
  • System Range - Up to 130m (430ft) at normal mode (2K), up to 100m at normal mode (4K); up to 180m (590ft) ultra mode (1080p @60Hz @24bpp) when using BC-HDKat6a cables.
  • Cables - For optimum range and performance, use Kramer's BC-HDKat6a cable. Note that the transmission range depends on the signal resolution, source and display used. The distance using non-Kramer CAT 6 cable may not reach these ranges.
  • EDID Pass Through - Passes EDID signals from the source to the display.
  • USB Pass-Through - For connecting a peripheral device, such as, a mouse or a keyboard.
  • Bidirectional RS-232 Interface - Data flows in both directions via the RS-232 interface, allowing status requests and device control.
  • Bidirectional Infrared Interface - For remote control of peripheral devices.
  • USB Pass-Through - For connecting a peripheral device, such as, a mouse or a keyboard.
  • Power over Ethernet (PoE) - The transmitter can provide power over the TP cable to a PoE-compatible receiver.
  • Audio Support - Embedded and unbalanced stereo audio transmission.
  • Indicators - LED status indicators for input, output, HDBT link and power.
  • Size - Compact MegaTOOLS - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B rack adapter.

Product Use Diagram

Mechanical 
Dimensions (WxDxH)7.38" x 4.53" x 1.00" (18.75cm x 11.50cm x 2.54cm)
Weight1.4 lbs (0.6 kg)
Device
Input1 HDMI connector, 1 stereo analog audio on a 3.5mm mini jack.
Output1 HDBT on a RJ-45 connector.
Ports1 IR on a 3.5mm mini jack, 1 USB 2.0 on a USB connector, 1 RS-232 on a 3-pin terminal block for the serial link, 1 RS-232 on a 3-pin terminal block for transmitter control, 1 Ethernet on an RJ-45 connector for transmitter control.
Max Data RateSupports up to 10.2Gbps (3.4Gbps bandwidth per graphic channel).
RS-232 Baud Rate115200.
ComplianceSupports HDMI and HDCP.
USB StandardUSB 1.1 and 2.0.
Power 
Specs48V DC, 800mA.
Environmental 
Operating Temp.32 to 104°F (0 to 40°C)
Storage Temp.-40 to 158°F (-40 to 70°C)
Humidity10% to 90%, RHL non-condensing.